51在线视频,亚洲视频专区在线,国产亚洲网站

您好，歡迎訪問蘇州賽浦斯電子有限公司官網

簡體中文 | English | 代理合作 | 關于我們 | 聯系我們

咨詢熱線

0512-66324802

產品中心

首頁 >> 真空吸筆 >> 電動晶圓吸筆

晶圓吸筆VPW6000AR-MW6-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPW6000AR-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7000AR-MW6-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7000AR-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7300AR-MW4-220

電動晶圓吸筆

市場價:0.00

價格:0.00
VPWE7300AR-MW6-220晶圓吸筆

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7300AR-VWT5R-AR

電動晶圓吸筆

市場價:0.00

價格:0.00
VPW6300AR-VWT5R-AR

電動晶圓吸筆

市場價:0.00

價格:0.00
VPW6300AR-MW6

電動晶圓吸筆

市場價:0.00

價格:0.00
VPW6300AR-MW4

電動晶圓吸筆

市場價:0.00

價格:0.00
VPW6300AR-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00
AV-5000-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00

The ADJUST-A-VAC was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMS devices and other very fragile components.  This vauum-tweezer allows the operator to adjust the vacuum level from just below atmospheric pressure to up to ten inches of mercury depending on the fragility of the part being handled.  An integrated  ten segment bar-graph-display visibly shows the vacuum level present during handling operations.   The bar graph will show minmum vacuum pressure until a part is grasped and then the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This Vacuum Tweezer is available in various kits depending on your handling application.  Kits are available in 110 or 220 volt operation. This ESD safe Kit Includes: 5 feet of coiled vacuum hose.Bar graph power-on and vacuum-level indicator.Adjustment knob for vacuum level.Rubber no-skid feet.ESD ground connection is by three wire power cord.Produces vacuum of up to ten inches of mercury.Wafer wand and wafer tip.Note: Other models available with different tip sizes. Quantity Pricing Available - Please call  CHINA(0086) 512-66324801 for more information 調整-A VAC的開發是由于客戶對手動處理非常薄/精致的基板、晶片、MEMS器件和其他非常易碎元件的關注。這個VAUM鑷子允許操作員根據正在處理的部件的脆弱性，將真空度從剛剛低于大氣壓力調節到十英寸汞柱。一個集成的十段條形圖顯示直觀地顯示了在操作過程中出現的真空度。條形圖將顯示微小的真空壓力，直到一部分被抓住，然后條形圖顯示被處理的部分的真空水平。此外，真空端口集成了用戶可更換的進口過濾器，保護工具的操作免受灰塵顆粒的影響。這種真空鑷子可根據您的操作應用在各種試劑盒中使用。工具包可在110或220伏操作。 該ESD安全套件包括： 5英尺的盤旋式真空軟管。條形圖上電和真空度指示器。真空度調節旋鈕。橡膠無滑腳。ESD接地是用三線電源線。產生高達十英寸汞柱的真空度。晶片棒和晶片尖端。注：其他型號有不同的小費尺寸。 數量定價-請致電中國（0086）512-66324801以獲取更多信息
WV9000-MW4-220 4寸

電動晶圓吸筆

市場價:0.00

價格:0.00

WAFER-VAC system with 4 inch molded wafer tip (VMWT-A)220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:Lighted On/Off switch.Whisper-quiet operation.Long-life pump.Class 100 Cleanroom SafePush-button wafer tip pen VWP-500-2.5mm6 foot clear coiled vacuum hose (VCH-2.5mm-6).Rubber no-skid feet.Top mounted handle holder.Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).VMWT-A molded wafer tip for handling up to 4" wafers Produces 10 inches of mercury.帶4英寸模鑄晶圓尖端的晶圓真空吸塵系統（VMWT-A） 直接插入2200伏50/60赫茲的通用晶片真空處理工具。這個緊湊的單元將處理各種各樣的晶圓，太陽能電池和其他基板。長壽命隔膜真空泵產生高達10英寸的汞，開放空氣流量為2.3 lpm。該裝置用三線電源線自動接地。此WV-9000配有以下功能：亮起/熄滅開關。小聲安靜地操作。長壽命泵。100級潔凈室保險箱按鈕式晶片尖筆VWP-500-2.5mm6英尺透明螺旋真空軟管（VCH-2.5mm-6）。橡膠防滑腳。頂部安裝的把手支架。電動泵尺寸為7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。VMWT-A用于處理最多4“晶圓的成型晶圓尖端產生10英寸汞。
WV9000-MW6-220 6寸

電動晶圓吸筆

市場價:0.00

價格:0.00

WAFER-VAC system with 6 inch molded wafer tip (VMWT-B)A general purpose wafer vacuum handling tool that plugs directly into 220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:Lighted On/Off switch.Whisper-quiet operation.Long-life pump.Class 100 Cleanroom SafePush-button wafer tip pen VWP-500-2.5mm6 foot clear coiled vacuum hose (VCH-2.5mm-6).Rubber no-skid feet.Top mounted handle holder.Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).VMWT-B molded wafer tip for handling up to 6" wafers Produces 10 inches of mercury.帶6英寸成型晶圓尖端的晶圓真空吸塵系統（VMWT-B）一種通用的晶片真空處理工具，直接插入220伏50/60赫茲。這個緊湊的單元將處理各種各樣的晶圓，太陽能電池和其他基板。長壽命隔膜真空泵產生高達10英寸的汞，開放空氣流量為2.3 lpm。該裝置用三線電源線自動接地。此WV-9000配有以下功能：亮起/熄滅開關。小聲安靜地操作。長壽命泵。100級潔凈室保險箱按鈕式晶片尖筆VWP-500-2.5mm6英尺透明螺旋真空軟管（VCH-2.5mm-6）。橡膠防滑腳。頂部安裝的把手支架。電動泵尺寸為7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。VMWT-B成型晶圓尖端，可處理多達6英寸的晶圓產生10英寸汞。
WV9000-MW8-220 8寸

電動晶圓吸筆

市場價:0.00

價格:0.00

WAFER-VAC system with 8 inch molded wafer tip (VMWT-C)A general purpose wafer vacuum handling tool that plugs directly into 220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:Lighted On/Off switch.Whisper-quiet operation.Long-life pump.Class 100 Cleanroom SafePush-button wafer tip pen VWP-500-2.5mm6 foot clear coiled vacuum hose (VCH-2.5mm-6).Rubber no-skid feet.Top mounted handle holder.Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).VMWT-C molded wafer tip for handling up to 8" wafers Produces 10 inches of mercury.帶8英寸成型晶圓尖端的晶圓真空吸塵系統（VMWT-C）直接插入220伏50/60赫茲的通用晶片真空處理工具。這個緊湊的單元將處理各種各樣的晶圓，太陽能電池和其他基板。長壽命隔膜真空泵產生高達10英寸的汞，開放空氣流量為2.3 lpm。該裝置用三線電源線自動接地。此WV-9000配有以下功能：亮起/熄滅開關。小聲安靜地操作。長壽命泵。100級潔凈室保險箱按鈕式晶片尖筆VWP-500-2.5mm6英尺透明螺旋真空軟管（VCH-2.5mm-6）。橡膠防滑腳。頂部安裝的把手支架。電動泵尺寸為7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。VMWT-C模壓晶片端頭，可處理多達8英寸的晶片產生10英寸汞。
WVE9000-MW8 8寸可調節

電動晶圓吸筆

市場價:0.00

價格:0.00

The WAFER-VAC? ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER? uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER? is available in various kits depending on your handling application. NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK? Wafer Tip sizes available.These ESD-SAFE kits feature: Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm). Bar graph power-on and vacuum-level indicator. Class 100 Cleanroom Safe. Whisper-quiet operation. Long-life pump. Side mounted handle holder. Rubber no-skid feet. ESD ground connection is by three wire power cord. Produces vacuum of up to ten inches of mercury. Replaceable inlet filter.This kit includes: COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK) PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM) Molded PEEK? WAFER TIP (VMWT-C) 3 WIRE POWER CORD
WVE9000-MW6 6寸可調節

電動晶圓吸筆

市場價:0.00

價格:0.00

The WAFER-VAC? ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER? uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER? is available in various kits depending on your handling application. NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK? Wafer Tip sizes available.These ESD-SAFE kits feature: Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm). Bar graph power-on and vacuum-level indicator. Class 100 Cleanroom Safe. Whisper-quiet operation. Long-life pump. Side mounted handle holder. Rubber no-skid feet. ESD ground connection is by three wire power cord. Produces vacuum of up to ten inches of mercury. Replaceable inlet filter.This kit includes: COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK) PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM) Molded PEEK? WAFER TIP (VMWT-B) 3 WIRE POWER CORD威發-Vac?Elite的開發是由于客戶擔心牢牢抓住關鍵部件，而不是因為真空泄漏而掉落。此真空鑷子?使用集成的十段條形圖顯示，可明顯顯示操作過程中的真空水平。條形圖將顯示最小真空壓力，直到抓住一個零件，然后當抓住一個零件時，條形圖將顯示所處理零件的真空水平。此外，真空端口集成了一個用戶可更換的入口過濾器，保護工具的操作不受灰塵顆粒的影響。此真空鑷子可根據您的操作應用提供各種套件。注意：如果沒有濾清器，此項將無法正常工作，請參閱下面的“更換進氣濾清器”（VF-40M-5）。注：可提供其他成型的Peek?晶片頭尺寸。這些ESD-SAFE套件具有：尺寸8“x 3”x 3.5“（203mm x 76mm x 89mm）。條形圖通電和真空液位指示器。100級潔凈室保險箱。小聲安靜地操作。長壽命泵。側裝把手支架。橡膠防滑腳。ESD接地采用三線電源線連接。產生高達10英寸汞的真空。可更換進口過濾器。該套件包括：盤繞式真空軟管-6（VCH-2.5mm-6-BLK）按鈕式圓珠筆（VWP-500-2.5mm）成型PEEK?晶片頭（VMWT-B）3線電源線

< 1 >

友情鏈接： 阿里網站淘寶店鋪導熱散熱論壇中國LED網模切之家??