VPW6300AR-MW6
Series 3 PORTA-WAND with MOLDED PEEK wafer tip VMWT-B, handles up to 6” (150mm) wafers, 110-220 VAC.
This PORTA-WAND 3 kit comes with a fixed internal 9.6V NiMH rechargeable battery, an in-stand charger (P/N VPW-CHARGER-110-220) and one MOLDED PEEK wafer tip. Ideal for handling wafers, disk media or any item that has a flat, hard surface. Easily lifts 300mm wafers. Rear exhaust of the pump air is standard on these units. The OPERATION INDICATOR turns on only when proper vacuum has been established to firmly grip the wafer. The same light flashes when the battery needs to be recharged. A PUSH-BUTTON provides easy on/off control. An internal air filter (VF-40M-5) is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Optional Feature: The two pins at the front of the tool allow use of the optional anti-rotate adaptor. This adaptor locks any of our molded wafer tips into one of eight rotational positions around the front of the wafer handling tool. See item number VMWT-ADAPT-AR on page 32 for a description of the operation.
This kit comes with a Switching Power AC Adapter that includes both 110 Volt and 220 Volt blades.
系列3 porta-wand模壓PEEK晶片端vmwt-b，處理高達6”（150mm）晶片，110-220伏。
這porta-wand 3工具包帶有一個固定的內部9.6V鎳氫可充電電池，一個充電器（P / N站vpw-charger-110-220）和一個成型的PEEK晶片尖端。理想的處理晶圓，磁盤媒體或任何項目，有一個平面，堅硬的表面。很容易把300mm晶圓。泵空氣的后排氣在這些裝置上是標準的。只有在設置適當的真空以牢牢控制晶片時，操作指示燈才能打開。當電池需要充電時，同樣的燈會閃爍。按鈕提供簡單的開/關控制。一個內部的空氣過濾器（vf-40m-5）是可更換工具的前面，和一個內部的排氣過濾器保證了更好的性能比1級。
可選功能：在工具前面的兩個引腳允許使用可選的反旋轉適配器。這個適配器將任何我們的模制晶片尖端鎖定在晶片處理工具前面的八個旋轉位置中的一個。看說明操作32頁項目編號vmwt-adapt-ar。
此套件配備了開關電源適配器，包括110伏和220伏的刀片。