HV-KIT-II-ESD
HANDI-VAC KIT, Static dissipative, with (3) bent probes, (2) straight probes and (5) conductive silicone vacuum cups;1/8", 3/16", 1/4", 3/8" and 1/2".
Our HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate:
1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the HANDI-VAC tool. Make sure that there is no dust on the rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe.
2. Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped.
3. Move the part to where you need it and a second squeeze of the bulb releases the part.
Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against. This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter. Use the larger cups to pick up larger and heavier parts. For better precision in part placement see our PEN-VAC or PEN-VAC PRO-Series self contained vacuum pens.
HANDI-VAC KIT，靜態耗散，具有（3）彎曲探針，（2）直探針和（5）導電硅真空杯；1/8，“3/16”，1/4，“3/8”和1/2。
我們的賽浦斯工具包是一個低成本的拾取和放置工具，可以進入每個人的工具箱。這些工具操作簡單：
1。選擇一個帶有一個橡膠真空杯的小頭，這個探頭比你想摘下的部位略微小一些。把探針緊緊地貼在HANDI VAC工具的尖端上。確保橡膠真空尖端上沒有灰塵。注意：我們更大的橡膠真空杯可以直接放置在HANDI VAC尖端，而不用探針。
2。輕輕擠壓HANDI VAC燈泡，將軟吸盤直接放置在拾取和放置部分，然后放松您的擠壓。這個部分現在被牢牢抓住了。
三。把零件移到需要的地方，燈泡的第二擠壓就會釋放零件。
這種工具的應用包括SMT部件、金屬部件、塑料部件或任何具有橡膠真空鑷子尖端可以密封的平滑無孔表面的物品。該工具可用于任何大小為3/32英寸（2.38毫米）至3/4英寸（19.05mm）的橡膠真空杯。使用較大的杯子來撿起更大更重的部件。為了更好的部分放置精度，請參閱我們的PE-VAC或PN-VAC PRO系列自帶真空筆。
HANDI-VAC KIT, Static dissipative, with (3) bent probes, (2) straight probes and (5) conductive silicone vacuum cups;1/8", 3/16", 1/4", 3/8" and 1/2".
Our HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate:
1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the HANDI-VAC tool. Make sure that there is no dust on the rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe.
2. Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped.
3. Move the part to where you need it and a second squeeze of the bulb releases the part.
Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against. This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter. Use the larger cups to pick up larger and heavier parts. For better precision in part placement see our PEN-VAC or PEN-VAC PRO-Series self contained vacuum pens.
HANDI-VAC KIT，靜態耗散，具有（3）彎曲探針，（2）直探針和（5）導電硅真空杯；1/8，“3/16”，1/4，“3/8”和1/2。
我們的賽浦斯工具包是一個低成本的拾取和放置工具，可以進入每個人的工具箱。這些工具操作簡單：
1。選擇一個帶有一個橡膠真空杯的小頭，這個探頭比你想摘下的部位略微小一些。把探針緊緊地貼在HANDI VAC工具的尖端上。確保橡膠真空尖端上沒有灰塵。注意：我們更大的橡膠真空杯可以直接放置在HANDI VAC尖端，而不用探針。
2。輕輕擠壓HANDI VAC燈泡，將軟吸盤直接放置在拾取和放置部分，然后放松您的擠壓。這個部分現在被牢牢抓住了。
三。把零件移到需要的地方，燈泡的第二擠壓就會釋放零件。
這種工具的應用包括SMT部件、金屬部件、塑料部件或任何具有橡膠真空鑷子尖端可以密封的平滑無孔表面的物品。該工具可用于任何大小為3/32英寸（2.38毫米）至3/4英寸（19.05mm）的橡膠真空杯。使用較大的杯子來撿起更大更重的部件。為了更好的部分放置精度，請參閱我們的PE-VAC或PN-VAC PRO系列自帶真空筆。